by eanrsmoIfactor is a simple, but handy application that was built to calculate the prime factor for any number.
It can factor large integers, but the practical limit is an integer in the trillions (15 digits). Factorization time depends on the digits of the processed number.
Download ⇒ DOWNLOAD
Download ⇒ DOWNLOAD
Portable Ifactor Crack +
Standard interface that is fully ANSI C/C++.
Multithreaded and supports any number of threads.
Cross platform: supports Windows, Linux, BeOS and Mac OS X.
* File : ‘factor.zip’
A multiplier for factorization to allow processing a larger number per given time. Factors by quadratic Sieving; it is slightly slower, but gets slightly better accuracy on factors of 60 digits and more.
Portable iFactor Description:
Standard interface that is fully ANSI C/C++.
Fully threaded, and does not use the G4 power.
Cross platform: supports Windows, Linux and Mac OS X.
* File: ‘ifactor10x.zip’
A multiplier for factorization to allow processing a larger number per given time. Factors by quadratic Sieving; it is slightly slower, but gets slightly better accuracy on factors of 60 digits and more.
Portable iFactor10x Description:
Standard interface that is fully ANSI C/C++.
Fully threaded, and does not use the G4 power.
Cross platform: supports Windows, Linux and Mac OS X.
* File : ‘ifactor.zip’
A menu for selecting which algorithm to use.
The algorithms are currently:
* Barrett (optimized for speed)
* Jacobi (fastest, worst accuracy)
* Lucas (fastest, best accuracy)
* Montgomery (slowest, best accuracy)
Can be configured to use any of the algorithms in any of the orders specified.
If the number is prime it will factorize using the Barrett algorithm which requires the smallest amount of memory; if the number is composite it will use Lucas for the best accuracy.
AutoIfactor Description:
Standard interface that is fully ANSI C/C++.
It uses the Xcode project module to support local iPhone projects, and projects using the MyEclipse for the Android SDK.
Xcode projects are supported for iPhone and iPad.
Dual selection of either local or remote projects.
The program can be run as a standalone application.
The interface dynamically displays the window.
Also supports the drag/drop interface for moving the windows from one monitor to another.
Dual selection of either local or remote projects.
The program can be run as a standalone application.
The interface dynamically displays the window.
Also supports the drag/drop interface for moving the windows from one monitor to another
Portable Ifactor Crack
Ifactor allows the user to easily calculate the prime factors of any number with a number of digits. For example, calculate the prime factor of 46253384567.
a) Input the number (or the value of a variable):
ifactor fx46253384567
Here are the basic command line options:
–help: show this usage message.
–rev: reverse the order of the prime factors.
–ff: reverse the order of the primes, but keep the same number.
–ff-rev: reverse the order of the primes and change the number.
The default behavior of the program is to reverse the order of the prime factors.
This is often the default action and is given in the usage message.
To reverse the order of the prime factors, simply use the –rev option.
If you want to reverse the prime factors and keep the same number, use the –ff-rev option.
If you want to reverse both the prime factors and change the number, use the –ff-rev-rev option.
–value: The value to factor.
–clear: Uncompte the variables.
–help: Show this usage message.
a) (Optional) Value to factor: The value of the number to factor. The default value is 1.
b) Reverse the order of the prime factors: Reverse the order of the prime factors.
This is the default action and is given in the usage message.
Note: The program has no way of knowing if the number is prime or not. It is up to the user to check if the answer is correct.
c) Keep the same order of the prime factors: Keep the same order of the prime factors.
This is the default action and is given in the usage message.
d) Reverse the order of the prime factors and change the number: Reverse the order of the prime factors and change the number.
This is the default action and is given in the usage message.
e) Reverse the order of the prime factors and change the number and change the number: Reverse the order of the prime factors and change the number.
This is the default action and is given in the usage message.
–help: Show this usage message.
For example, here is the usage message:
Ifactor – version 1.2 – SF (SF – Peter Neubauer)
usage: Ifactor fx46253384567
options:
91bb86ccfa
Portable Ifactor Crack+ Full Product Key Free Download
* The program is very small (less than 1 MB),
* Calculates the prime factor of a number in about 2 seconds,
* Store the factor list to a text file.
* If the factor list are big enough, will open the file to display,
* If the factor list can be displayed, Ifactor will
* Clear the screen,
* Open a new window and open a new file for each factor list,
* Open new windows and display the individual factor lists,
* Repeat until it reaches the last number.
* Execution time depends on the digits of the number.
* If a factor of a number is found, a label will be displayed,
* A new window and file for factor lists are opened,
* If the factor lists can be displayed, will open the file to display.
I created this application because I am always
trying to find out the prime factors, but sometimes,
the numbers are so large that I can’t find them,
or it takes such a long time to calculate
that I become bored. So I created this application,
Ifactor is an application that will factorize numbers.
It has a simple interface and very easy to use.
It supports unsigned, negative, fractional and positive integers.
The program is very simple, it will prompt you for the number to be factored, and then run a simple algorithm to calculate and display the prime factors.
The history shows the last 40 log files that were created.
These log files can be viewed by selecting ‘Last Log Files’.
Log Files
Ifactor will create its files in the folder specified by the
environment variable, Ifactor_save_folder.
If this environment variable is not set, Ifactor will default
to the folder, ‘.’.
Ifactor has support for adding its log files to E-mail messages,
therefore it can be used as an application that sends
the notification of the prime factor list of a large number.
Ifactor Tips
If you have some tips for Ifactor, or just would like to tell me if there’s an error with my code, feel free to send a mail to ifactor@progsys.com
Ifactor Updates
Ifactor will be updated once a month and will work
for all version of Windows.
Here you will find the list of files which Ifactor creates,
for each version of If
What’s New in the Portable Ifactor?
– palm OS 5.0 (5.2)
– J2ME 1.2 (1.3)
– Java virtual machine 1.2.x
– able to run on machines without Internet
1.2.3.1
1.2.3.2
1.2.3.3
⚡️ VERSION 1.1.3 ⚡️
Relaunched the app.
-Added a small bug-fix.
1.1.1
1.1.2
-Need to check if the operation is possible to do using FastTT ⚡️
-Added a small bug-fix.
1.1.1
-Changed the attribute of image of the splash screen.
1.1.2
-Add support to Android
1.1.3
-Added a small bug-fix.
⚡️ VERSION 1.0.1 ⚡️
– Changes in code to support palm device.
– In the previous version, showing time was not synchronizing with other time zones (Europe, Asia, etc.).
– Fix showing time from the system in the new version.
⚡️ VERSION 1.0.0 ⚡️
Initial release.
1.0.0
Reverted from this “Common prefix” code to avoid using codes that are already used by versions 1.1.0 and previous.
-Added an option to set the device name (if attached).
-Added a small dialog to display the number of messages in the system tray.
-Fixed a bug in the wallpaper.
⚡️ VERSION 0.11.1 ⚡️
Fixed a bug in the “Theme” code.
⚡️ VERSION 0.11 ⚡️
Added a mode “silent” to show the status of the splash screen.
Added a mode “about” to show the version of the software.
Added a mode “tips” to show tips.
Added a mode “tools” to open new options menu.
Changed the color of the status bar.
Changed the image of the splash screen.
Changed the color of the status bar.
The order of the options in the menu has changed.
⚡️ VERSION 0.10 ⚡️
–
System Requirements For Portable Ifactor:
OS: Windows 7
Processor: Intel Core i5-2500 (2.4 GHz) or AMD equivalent
Memory: 8 GB RAM
Hard Drive: 60 GB available space
How to Install or Play:
Read the full How to install/play tutorial for all necessary instructions.
Why would I want to Play or Install this Game?
You’ve got to love all things Creative. If you enjoy anything they’ve created, then you should enjoy Rocket League. This game is pretty simple to get into and as long
